845.679.2862 | Hours: MON-SAT 7-6 | SUN 8-5 | 84 Tinker St. Woodstock, NY 12498 | Get Store Directions
LOG IN ACCOUNT
Rust Stripper & Neutralizer
Rust remover gel is a cleaner, safer, and easier rust remover for iron and steel. It is non-toxic, environmentally friendly, and contains no harmful or corrosive acids, alkalis, or solvents. High adhesive formula allows for simple and controlled application - gel clings to metal. Gel must remain moist to remove rust. One jar covers approximately 230 Sq. In.of surface area. Good for 1 year after opening.
Metal Rescue Rust Remover Bath is your clean, safe and easy solution to removing rust from iron and steel. Metal Rescue Rust Remover Bath will take rust off the most heavily corroded metal parts, yet it is safe enough that you can put your bare hands into it. Metal Rescue is most effective when used as a bath or soak, simply immerse metal part in a plastic container for 5 minutes to 48 hours depending on the severity of the rust. Easy to use, virtually no labor involved (no scrubbing, dipping, brushing or other agitation). Just soak, check, and dry. No acids, no caustics, no health risks, non-toxic and safe on skin. Metal Rescue does not remove properties of the metal, does not etch the metal like an acid, leaves metal surface intact and less susceptible to return/flash rusting.
Chemically converts rust to a protective coating. Eliminates the need to sand rust to bare metal. After application, rust is transformed into a black, rust inhibitive and paintable coating. 8 Oz.
Introducing a new product with a fresh, premium look that further expands Rust-Oleum's reach into a total rust treatment. It instantly converts rust to a protected paintable surface. The hard, flat black finish can be topcoated with any color. It also provides future rust protection by chemically bonding and transforming existing rust. No need to wire brush rust down to bare metal. 10.25 Oz. aerosol can covers approximately 70 Sq. Ft.
Removes rust from metal surfaces and removes bluing from surfaces such as guns, reels, etc. Remove loose scale with coarse sandpaper or wire brush. Apply Naval Jelly liberally to rusty surface that is free of dirt, oil and grease. Wipe off immediately from painted surfaces. Allow to work for 15 to 30 minutes and rinse off. Repeat application on heavily corroded surfaces. Limit application time to 5 minutes when used on chrome or other plated surfaces.
Destroys rust and leaves a tough coating that can be painted without another primer. Seals and protects metal. Remove loose rust with coarse sandpaper or wire brush. Surface must be clean, dry and free of grease, dirt and oil. Spray or brush Extend onto rusty surface and allow to dry overnight before top coating. Spray can is handy for hard-to-reach areas or detailed objects such as lawn furniture and hand rails.
Destroys rust and leaves a tough coating that can be painted without another primer. Seals and protects metal. Remove loose rust with coarse sandpaper or wire brush. Surface must be clean, dry and free of grease, dirt and oil. Spray or brush Extend onto rusty surface and allow to dry overnight before top coating. Spray can is handy for hard-to-reach areas or detailed objects such as lawn furniture and hand rails.
OSPHO is a rust-inhibiting coating not a paint. OSPHO causes iron oxide (rust) to chemically change to iron phosphate an inert, hard substance that turns the metal black. Use on new metals, for new ferrous or aluminum metals. Is effective for exterior and interior work alike. Recommended for use under oil-base primers and paints. Test a small area before using under epoxy or latex base paint. Covers approximately 600 Sq. Ft. per gallon. Normally requires overnight drying before topcoating. Contains phosphoric acid. Keep out of reach of children. Use adequate ventilation in confined areas, skin and eye protection should be used.
Removes and prevents rust in 1 step. Removes hard water, calcium, and lime deposits. Water-based formulation penetrates into every void of a metal surface and dissolves rust and oxidation through chemical action. When dry, Must For Rust accepts any primer, paint, coating, plating, welding, etc. Provides a clean surface free of contaminants. Safe, fast, effective on rusted or new metals, chrome, brick, concrete, stucco, fiberglass, porcelain, ceramic, and glass. Not for use on marble.
Removes and prevents rust in 1 step. Removes hard water, calcium, and lime deposits. Water-based formulation penetratesinto every void of a metal surface and dissolves rust and oxidation through chemical action. When dry, Must For Rust accepts any primer, paint, coating, plating, welding, etc. Provides a clean surface free of contaminants. Safe, fast, effective on rusted or new metals, chrome, brick, concrete, stucco, fiberglass, porcelain, ceramic, and glass. Not for use on marble.
